Spherical powders with good flowability are interesting for this process because they can be fed more easily at a constant rate. Thermal spray usually requires powders with fine particle size distribution because short residence time in the hot zone can only melt efficiently particles below 45 microns. Highly spherical powders are ideal for AM which requires excellent flowability and high density uniform packing. A high level of purity of the metallic powders is also critical to reach good mechanical properties and to allow the powder to be recycled many times.
Given the above benefits and constant progress in the performance and productivity of the equipment, additive manufacturing is rapidly developing in Europe, North America and Asia. Highly spherical powders are ideal for AM which requires excellent flowability and high density uniform packing. A high level of purity of the metallic powders is also critical to reach good mechanical properties and to allow the powder to be recycled many times.
Baoji Titanium Wire Industry Co., Ltd. is able to manufacture CP-Ti and Alloyed titanium wire for spherical powder and micropowder.
ASTM B348 Ti-6Al-4V Eli titanium wire for spherical Nano powder and 3D printing
Titanium wire, Ti-wire, ASTM F136, GRADE 5 Eli, GR.5 TI-6AL-4V Eli micro powders
Ti-Gr. 5: recommended for high mechanical resistance applications up to 350 to 400°C
Combines an ideal set of properties: high tensile strength, low density, toughness and ductility, match in ability comparable to austeni1ic stainless steel，Suitable to solution and precipitation heat treatments
Ti-Gr. 5 eli: Ti6Al4V with extra low interstitial elements content, with enhanced ductility, typically used in the non-aged condition for maximum toughness，Widely used for cryogenic devices as well as medical applications
Product specifications:
Diameter: 3.175 mm, 6.35 mm
Weight: about 50kg per coil
Shape: in coil
Surface treatment: polished, pickled and peeled
Grade status: Gr. 5 Eli (Ti-6Al-4V Eli)
Standards: ASTM F136, ASTM B863, ASTM 2965, ASTM 3623 and AMS 4928
Applications:
Medical and dental devices
Aerospace
Consumer goods
Design/architecture
Tooling
Robotics
Automotive
Defense
Motor sports
Fashion industry
Annual capability:
600MT
Packing:
In coil: protected by foam paper + plywood case
Delivery lead-time:
5-15 days
Shipping:
By international express (TNT, FedEx, DHL, UPS), by air, sea
Trade terms:
FOB China, CIF and DDP
Payment terms:
T/T, L/C, PayPal, Western Union
TESTING REPORT FOR GR.5 ELI (MICRO POWDER).pdf
ASTM B348 Ti-6Al-4V Eli titanium wire for spherical Nano powder and micro powder
1. Product designation：
Ti-6Al-4V Eli wire
2. Chemical composition：
| Element | Target(wt.%) | Minimum(wt.%) | Maximum(wt.%) | ||||||
| Oxygen (O) | - | - | 0.070 | ||||||
| Nitrogen (N) | - | - | 0.012 | ||||||
| Carbon (C) | - | - | 0.03 | ||||||
| Hydrogen (H) | - | - | 0.005 | ||||||
| Iron (Fe) | 0.20 | 0.18 | 0.25 | ||||||
| Aluminium (Al) | 6.40 | 6.30 | 6.50 | ||||||
| Vanadium (V) | 4.00 | 3.50 | 4.50 | ||||||
| Tin (Sn) | - | - | 0.08 | ||||||
| Molybdenum (Mo) | - | - | 0.08 | ||||||
| Copper (Cu) | - | - | 0.08 | ||||||
| Manganese (Mn) | - | - | 0.08 | ||||||
| Zirconium (Zr) | - | - | 0.08 | ||||||
| Yttrium (Y) | - | - | 0.005 | ||||||
| Zinc (Zn) | - | - | 0.002 | ||||||
| Other elements, each | - | - | 0.08 | ||||||
| Other elements, total | - | - | 0.20 | ||||||
| Titanium (Ti) | Balance | Balance | Balance | ||||||
| Zn + Mo + Cu + Mn | - | - | 0.15 | ||||||
| Chemical analysis of the wire shall be done according to the requirements of ASTM B 348 or equivalent ASTM | |||||||||
